PPS Extrusion grade
PPS Extrusion grade
Resin Grade
|
Brand |
Melt finger(calibration) |
Index range |
Moisture% |
Residue% |
Whiteness |
|
DR-E00 |
80 |
≥100 |
≤0.3 |
≤0.3 |
≥80 |
Application
PPS extrusion grade has good mechanical properties, high melt strength, chemical corrosion resistance and heat resistance, etc, This product can be used for extrusion molding bar, pipe, plate products and other fields.
Performance Feature
1. High hear resistance. Its thermal deformation temperature exceeds 260°C, the long term service temperature is 220'C-240°C.and the short term service temperature can reach 260°C
2. Strong chemical resistance. At present, no solvent has been found that can dissolve PPS below 200°C,and it is very resistant to inorganic acids, bases and salts.
3. Excellent electrical performance. Even in the environment of high temperature, high humidity, and high frequency, it still has high volume resistivity, surface resistivity and electrical strength, low dielectric constant and dielectric loss Angle tangent, which made it an excellent material for insulating.
4. Perfect mechanical performance. Strong rigidity, high surface hardness, excellent creep resistance and fatigue resistance.
5. Fine dimensional stability. it has small coefficient of thermal expansion, low creep, low water absorption and small molding shrinkage. It still shows good dimensional stability even under high temperature and high humidity conditions.
6. Well processing performance. Good melt fluidity, fast crystallization speed, short molding cycle and easy molding.
7. Outstanding wear-ability . The wear-ability can be greatly improved by filling fluorine resin and carbon fiber.
8. Great flammability.PPS has flammability itself, the combustion properties can be up to FV-0 level.
9. Small proportion. The proportion of PPS is about one fifth of that of steel.
|
|
|
||
|
|
|
keywords: PPS Extrusion grade
classification: Product
PPS Extrusion grade
Resin Grade
|
Brand |
Melt finger(calibration) |
Index range |
Moisture% |
Residue% |
Whiteness |
|
DR-E00 |
80 |
≥100 |
≤0.3 |
≤0.3 |
≥80 |
Application
PPS extrusion grade has good mechanical properties, high melt strength, chemical corrosion resistance and heat resistance, etc, This product can be used for extrusion molding bar, pipe, plate products and other fields.
Performance Feature
1. High hear resistance. Its thermal deformation temperature exceeds 260°C, the long term service temperature is 220'C-240°C.and the short term service temperature can reach 260°C
2. Strong chemical resistance. At present, no solvent has been found that can dissolve PPS below 200°C,and it is very resistant to inorganic acids, bases and salts.
3. Excellent electrical performance. Even in the environment of high temperature, high humidity, and high frequency, it still has high volume resistivity, surface resistivity and electrical strength, low dielectric constant and dielectric loss Angle tangent, which made it an excellent material for insulating.
4. Perfect mechanical performance. Strong rigidity, high surface hardness, excellent creep resistance and fatigue resistance.
5. Fine dimensional stability. it has small coefficient of thermal expansion, low creep, low water absorption and small molding shrinkage. It still shows good dimensional stability even under high temperature and high humidity conditions.
6. Well processing performance. Good melt fluidity, fast crystallization speed, short molding cycle and easy molding.
7. Outstanding wear-ability . The wear-ability can be greatly improved by filling fluorine resin and carbon fiber.
8. Great flammability.PPS has flammability itself, the combustion properties can be up to FV-0 level.
9. Small proportion. The proportion of PPS is about one fifth of that of steel.
|
|
|
||
|
|
|
last page
DOWREN NEW MATERIAL (HENAN) CO.,LTD
TELL：Selina.Liu +86-0393-8993626 / +86 18137458807
ADD：150 meters north of the intersection of Zhongyuan Road and Pushang Road, Puyang City,Henan Province
EMAIL：dowren@dowren.com
Wechat ID