PEEK Coarse Powder
PEEK Coarse Powder, also referred to as virgin or base powder, is produced by polymerizing PEEK resin, extruding it into pellets, and subsequently grinding and classifying to a particle size range of 200 – 1000 μm. It is the highest-volume and most widely used grade in the PEEK powder family, suitable for direct injection, compression and extrusion molding, and is also the feedstock for further grinding into fine and ultrafine grades.
Basic Parameters ：
Parameter | Typical Value | Unit | Remarks |
Appearance | White to cream-colored granular powder | — | Uniform color, no visible impurities |
Particle Size Range | 200 – 1000 | μm |
|
Apparent Density | 0.40 – 0.65 0.40 – 0.65 | g/cm³ | ISO 60 / ASTM D1895 |
Melt Flow Rate (MFR) | 5 – 60 | g/10min | 380°C / 5 kg |
Melting Point (Tm) | 340 – 343 | °C | By DSC method |
Glass Transition (Tg) | 143 | °C | By DSC method |
Tensile Strength | ≥ 95 | MPa | ASTM D638, injection-molded specimen |
Elongation at Break | ≥ 20 | % | ASTM D638 |
Flexural Strength | ≥ 140 | MPa | ASTM D790 |
Water Absorption (24h) | ≤ 0.5 | % | ISO 62 |
Volatiles Content | ≤ 0.5 | % | Controls voids & silver streaks in molded parts |
Ash Content | ≤ 0.3 | % | Ignition at 800°C |
Package | 25 kg / drum | — | PE bag + Al foil + fiber drum |
Features：
● High Flowability in Pellet Form ：Good flow into mold cavities and venting
● High Purity & Low Volatiles ：Avoids silver streaks and voids in molded parts● Re-grindable ：Re-grindable, reusable 3+ cycles
● Controllable Particle Size Distribution (PSD)：Customizable PSD for various molding processes
● Consistent Color：Natural cream, black or custom colors available
Applications:
● Structural Parts: Gears, bearings, bushings, and shaft sleeves
● Petrochemical: Valves, seals, downhole tools, and chemical pump components
● Electronics: Connectors, insulators, and semiconductor wafer carriers
● Automotive: Turbocharger bearings, transmission components, and sealing rings
● Aerospace: Cabin interior parts, structural fasteners, and engine peripheral components
keywords: PEEK Coarse Powder
classification: Product
PEEK Coarse Powder, also referred to as virgin or base powder, is produced by polymerizing PEEK resin, extruding it into pellets, and subsequently grinding and classifying to a particle size range of 200 – 1000 μm. It is the highest-volume and most widely used grade in the PEEK powder family, suitable for direct injection, compression and extrusion molding, and is also the feedstock for further grinding into fine and ultrafine grades.
Basic Parameters ：
Parameter | Typical Value | Unit | Remarks |
Appearance | White to cream-colored granular powder | — | Uniform color, no visible impurities |
Particle Size Range | 200 – 1000 | μm |
|
Apparent Density | 0.40 – 0.65 0.40 – 0.65 | g/cm³ | ISO 60 / ASTM D1895 |
Melt Flow Rate (MFR) | 5 – 60 | g/10min | 380°C / 5 kg |
Melting Point (Tm) | 340 – 343 | °C | By DSC method |
Glass Transition (Tg) | 143 | °C | By DSC method |
Tensile Strength | ≥ 95 | MPa | ASTM D638, injection-molded specimen |
Elongation at Break | ≥ 20 | % | ASTM D638 |
Flexural Strength | ≥ 140 | MPa | ASTM D790 |
Water Absorption (24h) | ≤ 0.5 | % | ISO 62 |
Volatiles Content | ≤ 0.5 | % | Controls voids & silver streaks in molded parts |
Ash Content | ≤ 0.3 | % | Ignition at 800°C |
Package | 25 kg / drum | — | PE bag + Al foil + fiber drum |
Features：
● High Flowability in Pellet Form ：Good flow into mold cavities and venting
● High Purity & Low Volatiles ：Avoids silver streaks and voids in molded parts● Re-grindable ：Re-grindable, reusable 3+ cycles
● Controllable Particle Size Distribution (PSD)：Customizable PSD for various molding processes
● Consistent Color：Natural cream, black or custom colors available
Applications:
● Structural Parts: Gears, bearings, bushings, and shaft sleeves
● Petrochemical: Valves, seals, downhole tools, and chemical pump components
● Electronics: Connectors, insulators, and semiconductor wafer carriers
● Automotive: Turbocharger bearings, transmission components, and sealing rings
● Aerospace: Cabin interior parts, structural fasteners, and engine peripheral components
last page
DOWREN NEW MATERIAL (HENAN) CO.,LTD
TELL：Selina.Liu +86-0393-8993626 / +86 18137458807
ADD：150 meters north of the intersection of Zhongyuan Road and Pushang Road, Puyang City,Henan Province
EMAIL：dowren@dowren.com
WhatsApp (+86 18137458807)